DZA(S) 65-40-125 1.5kW End-Suction Pump with Motor (Stainless Steel)

Price range: R13,610.00 through R13,980.00

Complete 1.5kW stainless-steel end-suction pump set (pump end fitted to its motor) – up to 20m head and 42 m³/h. Choose your motor voltage.

The DZA(S) 65-40-125 is a flanged end-suction centrifugal pump with a 304 stainless-steel pump end, supplied here as a complete set with a 1.5kW (2HP) electric motor. It is built for continuous duty: farm and orchard irrigation, dam and reservoir transfer, water supply to buildings, HVAC and cooling-water circulation, and general industrial water.

Size 65-40-125: 65mm suction flange, 40mm delivery flange, 125mm nominal impeller
Motor: 1.5kW (2HP), 2-pole (about 2900 rpm)
Maximum head: 20m (about 2 bar with the valve closed)
Maximum flow: about 42 m³/h (700 l/min)
Pump casing and impeller: 304 stainless steel – suited to clean or slightly aggressive water

Motor options:

With 220V single-phase motor – code 15070079
With 380V three-phase motor – code 15070080
With 525V three-phase motor – code 15070081

Pump end only (no motor) is also available: bareshaft code 15070032.

Performance Table:

Flow (m³/h)	Flow (l/min)	Head (m)
0	0	20
12	200	19
18	300	18
20	333	17
22	367	16.5
24	400	15
27	450	14
30	500	12.5
36	600	10
42	700	7

Will this pump suit my job? Add up the height the water must be lifted (from the water level to the highest outlet) plus about 1m for every 10m of pipe and fittings – that is your total head. Then find your flow in the table: the pump is a good match if the head at your flow is at or just above what you need. This model works best around 24 m³/h at 15m. 380V and 525V motors need a three-phase supply and a suitable starter/overload; 220V motors run on normal household single-phase power. Not sure? Send us your flow, lift and pipe length and we will size it for you.

Configuration	With 220V single-phase motor, With 380V three-phase motor, With 525V three-phase motor