The CPM80 is a high-flow single-stage end-suction centrifugal pump for moving large volumes of water – irrigation, filling tanks and dams, and transfer pumping on farms and larger properties.
- Power: 2.2kW (3HP), 220–240V single phase
- Maximum head: 30m
- Maximum flow: about 24 m³/h
- Pump only – see the CPM80 combo for an automatic booster kit
Performance Table:
| Flow (m³/h) | Flow (l/min) | Head (m) |
|---|---|---|
| 0 | 0 | 30 |
| 3 | 50 | 29.1 |
| 6 | 100 | 27.6 |
| 9 | 150 | 24.9 |
| 12 | 200 | 22 |
| 15 | 250 | 19.6 |
| 18 | 300 | 16.3 |
| 21 | 350 | 10.8 |
| 24 | 400 | 2.7 |
Choosing the right booster pump: count the taps and showers that will run at the same time and how high the water must go (a double-storey house needs more head than a single storey). Each 10m of head is about 1 bar of pressure. Pick a pump whose head at your flow is comfortably above what you need. Not sure? Send us your setup (tank position, number of bathrooms, storeys) and we will recommend a pump.



