CPM190 Booster Pump Combo 1.5kW 220V (with Flow Controller)
R7,000.00
Pre-assembled CPM190 centrifugal booster kit with automatic flow controller – up to 40m head.
Ready-to-use household pressure booster built on the CPM190 centrifugal pump, pre-assembled with an automatic flow controller, wiring and plug.
- Power: 1.5kW, 220–240V
- Maximum head: 40m
- Best for: boosting water pressure from a tank to a home
Performance Table:
| Flow (m³/h) | Flow (l/min) | Head (m) |
|---|---|---|
| 0 | 0 | 40 |
| 0.6 | 10 | 39 |
| 1.2 | 20 | 38.1 |
| 1.8 | 30 | 37.1 |
| 2.4 | 40 | 36 |
| 3 | 50 | 35 |
| 3.6 | 60 | 33.8 |
| 4.8 | 80 | 31.3 |
| 6 | 100 | 27.2 |
| 7.2 | 120 | 22.2 |
What is a booster combo? The pump comes pre-assembled with an automatic flow controller, wiring and a 3-point moulded plug – connect the pipes, plug it in and it runs by itself: the pump starts when you open a tap and stops when the flow stops.
This combo is fitted with the PS18L electronic flow controller with digital display.
Choosing the right booster pump: count the taps and showers that will run at the same time and how high the water must go (a double-storey house needs more head than a single storey). Each 10m of head is about 1 bar of pressure. Pick a pump whose head at your flow is comfortably above what you need. Not sure? Send us your setup (tank position, number of bathrooms, storeys) and we will recommend a pump.