SINGLE STAGE BOOSTER PUMPS WITH PRESSURE SWITCH
CPM146 Booster Pump
Range of performance
Flow rate: Max 100 L/min 6000/h)
Head: Max 26m
Power: 0.55Kw
Limits of use
Suction lift: Max 7m
Liquid temperature: 40 oC
Ambient temperature: 40 oC
Uses and installations
This range is recommended for pumping clean water without abrasive particles and liquids that are chemically non-aggressive for the materials
of which the pump is made. Due to their reliability, simplicity of use, and economy, they are suitable for domestic use and in particular for irrigating and pressure boosting systems. The pump must be installed under a vented cover and protected against exposure to rain or water spray.
Construction Characteristics
Pump Body: Cast Iron
Impeller: Brass
Motor Shaft: Stainless Steel 304 Mechanical Seal: Ceramic-graphite
Electric Motor: Single-phase 230V – 50Hz with
capacitor and thermal overload protector.
CP: three-phase380/400v -50Hz
Insulation: Class B
Protection: IP 44
PERFORMANCE
Technical Data
| NO | MODE | POWER | Q (m3/h) | 0 | 0.6 | 1.2 | 1.8 | 2.4 | 3 | 3.6 | 4.8 | 6 | 7.2 | |
| 1ph / 3ph | kW | HP | Q (l/min) | 0 | 10 | 20 | 30 | 40 | 50 | 60 | 80 | 100 | 120 | |
| 1 | CPM130 | 0.37 | 0.5 |
H (m) | 22 | 21.5 | 21 | 20.5 | 19 | 17 | 15 | 12.6 | ||
| 2 | CPM146 | 0.55 | 0.75 | 26 | 25.5 | 25 | 24.5 | 23 | 21 | 19 | 16.4 | 13 | ||
| 3 | CP/M158 | 0.75 | 1 | 32 | 31.5 | 31 | 30 | 28.5 | 27 | 25 | 22 | 19 | ||
| 4 | CP/M170 | 1.1 | 1.5 | 44 | 39.1 | 37.8 | 36.9 | 35.1 | 32.8 | 29.9 | 27.4 | 23.6 | 19.1 | |
| 5 | CP/M190 | 1.5 | 2.2 | 52 | 48 | 36.3 | 45.2 | 43.6 | 42.2 | 39 | 36 | 32 | 23.3 | |
| 6 | CP/M200 | 2.2 | 3 | 59 | 57 | 56.2 | 55.5 | 54 | 52.6 | 50.3 | 47 | 42 | 37 | |
Frequently asked questions
Which booster pump do I need?
Count the taps and showers that run at the same time and how high the water must go, for example to a double-storey house. Our booster pump size guide shows how to choose, or WhatsApp your setup to 061 744 1001.
Do I need a pressure tank?
A pump with a pressure switch needs a pressure tank, or it starts every time a tap opens. Pumps with a flow controller or a VSD can run without one.
Why does my booster pump keep switching on and off?
Usually the pressure tank has lost its air charge, or there’s a leak. See booster pump keeps switching on and off.
Can it pump from a JoJo tank?
Yes. Booster pumps are made to pump from a storage tank to the house; keep the pipe from the tank at least as wide as the pump’s inlet.
How much is delivery?
R150 to main centres in South Africa: one fee per order, the largest item’s. Outlying areas can cost more; see our delivery terms. You can also collect in Pretoria by appointment.





