CPM130 Booster Pump Combo 0.37kW 220V (with Flow Controller)
R3,130.00
Pre-assembled CPM130 centrifugal booster kit with automatic flow controller – up to 21m head.
Ready-to-use household pressure booster built on the CPM130 centrifugal pump, pre-assembled with an automatic flow controller, wiring and plug.
- Power: 0.37kW, 220–240V
- Maximum head: 21m
- Best for: boosting water pressure from a tank to a home
Performance Table:
| Flow (m³/h) | Flow (l/min) | Head (m) |
|---|---|---|
| 0 | 0 | 21 |
| 0.6 | 10 | 19.4 |
| 1.2 | 20 | 18 |
| 1.8 | 30 | 16.4 |
| 2.4 | 40 | 15 |
| 3 | 50 | 13.5 |
| 3.6 | 60 | 11.9 |
| 4.8 | 80 | 8 |
| 6 | 100 | 0 |
What is a booster combo? The pump comes pre-assembled with an automatic flow controller, wiring and a 3-point moulded plug – connect the pipes, plug it in and it runs by itself: the pump starts when you open a tap and stops when the flow stops.
Choosing the right booster pump: count the taps and showers that will run at the same time and how high the water must go (a double-storey house needs more head than a single storey). Each 10m of head is about 1 bar of pressure. Pick a pump whose head at your flow is comfortably above what you need. Not sure? Send us your setup (tank position, number of bathrooms, storeys) and we will recommend a pump.