CP80 Water Pressure Pump
R7,700.00
CPM80
380v
2.2KW
Head: 30 m
Flow: 400 l/m (24 m³/h)
Outlet: 2″
Inlet 2″
SINGLE-STAGE BOOSTER PUMPS
CP80 Booster Pump
Range of performance
Flow rate: Max 400 L/min (24m³/h)
Head: Max 30m
Power: 2.2kW
Limits of use
Suction lift: Max 7m
Liquid temperature: 40 oC
Ambient temperature: 40 oC
Uses and installations
This range is recommended for pumping clean water without abrasive particles and liquids that are chemically non-aggressive for the materials of which the pump is made.
Due to their reliability, simplicity of use, and economy, they are suitable for domestic use and in particular for irrigating and pressure boosting systems.
The pump must be installed under a vented cover and protected against exposure to rain or water spray.
Construction Characteristics
Pump Body: Cast Iron
Impeller: Brass
Motor Shaft: Stainless Steel 304 Mechanical
Seal: Ceramic-graphite
Electric Motor: Single-phase 380V – 50Hz with thermal overload protector.
CP: three-phase380/400v -50Hz
Insulation: Class B
Protection: IP 44
Performance Table:
| Flow (m³/h) | Flow (l/min) | Head (m) |
|---|---|---|
| 0 | 0 | 30 |
| 3 | 50 | 29.1 |
| 6 | 100 | 27.6 |
| 9 | 150 | 24.9 |
| 12 | 200 | 22 |
| 15 | 250 | 19.6 |
| 18 | 300 | 16.3 |
| 21 | 350 | 10.8 |
| 24 | 400 | 2.7 |
Performance data from the Vega CPM High Flow brochure. Pick a pump whose head at the flow you need is higher than your total head (height to lift the water plus pipe friction).