The 8VP 80-11 is an 8" stainless steel multistage submersible borehole pump from the 8VP80 range (nominal flow around 80 m³/h), delivering heads of up to 226m and flows up to 100 m³/h. It runs on a three-phase supply (380V or 525V). Choose a complete set, or just the pump end if you are replacing a worn one.
At a glance: delivers about 60 m³/h (60 000 litres per hour) at 163m head. Best for large irrigation schemes, municipal water supply and mine dewatering from high-yield boreholes.
Available options:
- 380V set: pump + water-filled motor (no starter): 8VP 80-11 pump end + 37kW 380V three-phase water-filled 6" motor (starter panel not included)
- 525V set: pump + water-filled motor (no starter): 8VP 80-11 pump end + 37kW 525V three-phase water-filled 6" motor (starter panel/VSD not included)
- Pump end only (no motor): 8VP 80-11 pump end (wet end) only – to replace a worn pump end on an existing 37kW 6" motor
- Motor power: 37kW
- Pump diameter: 8" – needs a borehole with an internal diameter of at least 200mm
- Stainless steel pump construction
Performance Table:
| Flow (m³/h) | Flow (l/min) | Head (m) |
|---|---|---|
| 0 | 0 | 226 |
| 20 | 333 | 217 |
| 30 | 500 | 206 |
| 40.2 | 670 | 192 |
| 50.1 | 835 | 177 |
| 60 | 1000 | 163 |
| 70.2 | 1170 | 149 |
| 80.1 | 1335 | 133 |
| 90 | 1500 | 110 |
| 100 | 1667 | 80 |
Choosing the right pump: add the depth to your borehole’s pumping water level, the height up to your tank or reservoir and about 10% for pipe friction – that’s your total head. Pick a pump whose head at the flow you need is higher than that total. Your borehole must also be able to deliver that flow – ask your driller for the yield-test result, otherwise the pump can run the borehole dry. Not sure which pump fits? Send us your borehole depth, water level, yield and how far/high you need to pump and we’ll recommend the right model before you order.
Oil-filled or water-filled motor? Both drive the pump in the same way. Oil-filled motors are sealed units (rated 25 bar). Water-filled motors (rated 35 bar) can usually be rewound if they burn out, which normally makes repairs cheaper on bigger motors.
Starter / controller: motors above 30kW need a soft starter, star-delta panel or VSD sized by your electrician – these are not included. Ask us for a quote on the complete installation. See all Borehole Controllers.
Not included: submersible cable, rope, delivery pipe and base plate. Large borehole pumps are often supplied to order – contact us to confirm stock and delivery time.




