SINGLE-STAGE BOOSTER PUMPS WITH FLOW CONTROL
CPM130
Range of performance
Flow rate: Max 80 L/min (4.8L/h)
Head: Max 22m
Power: 0.37Kw
Limits of use
Suction lift: Max 7m
Liquid temperature: 40 oC
Ambient temperature: 40 oC
Uses and installations
This range is recommended for pumping clean water without abrasive particles and liquids that are chemically non-aggressive for the materials of which the pump is made. Due to their reliability, simplicity of use, and economy, they are suitable for domestic use and in particular for irrigating and pressure boosting systems. The pump must be installed under a vented cover and protected against exposure to rain or water spray.
Construction Characteristics
Pump Body: Cast Iron
Impeller: Brass
Motor Shaft: Stainless Steel 304 Mechanical Seal: Ceramic-graphite
Electric Motor: Single-phase 230V – 50Hz with
capacitor and thermal overload protector.
CP: three-phase380/400v -50Hz
Insulation: Class B
Protection: IP 44
PERFORMANCE
Technical Data
NO | MODE | POWER | Q (m3/h) | 0 | 0.6 | 1.2 | 1.8 | 2.4 | 3 | 3.6 | 4.8 | 6 | 7.2 | |
1ph / 3ph | kW | HP | Q (l/min) | 0 | 10 | 20 | 30 | 40 | 50 | 60 | 80 | 100 | 120 | |
1 | CPM130 | 0.37 | 0.5 |
H (m) |
22 | 21.5 | 21 | 20.5 | 19 | 17 | 15 | 12.6 | ||
2 | CPM146 | 0.55 | 0.75 | 26 | 25.5 | 25 | 24.5 | 23 | 21 | 19 | 16.4 | 13 | ||
3 | CP/M158 | 0.75 | 1 | 32 | 31.5 | 31 | 30 | 28.5 | 27 | 25 | 22 | 19 | ||
4 | CP/M170 | 1.1 | 1.5 | 44 | 39.1 | 37.8 | 36.9 | 35.1 | 32.8 | 29.9 | 27.4 | 23.6 | 19.1 | |
5 | CP/M190 | 1.5 | 2.2 | 52 | 48 | 36.3 | 45.2 | 43.6 | 42.2 | 39 | 36 | 32 | 23.3 | |
6 | CP/M200 | 2.2 | 3 | 59 | 57 | 56.2 | 55.5 | 54 | 52.6 | 50.3 | 47 | 42 | 37 |