QB80 Booster Pump Combo 0.75kW 220V (with Flow Controller)
R2,850.00
Pre-assembled QB80 booster pump kit with automatic flow controller and plug – up to 60m head.
Ready-to-use household pressure booster: the QB80 peripheral pump comes pre-assembled with an automatic flow controller, wiring and a 3-point plug.
- Power: 0.75kW (1HP), 220–240V
- Maximum head: 60m
- Best for: boosting pressure from a tank to a small home
Performance Table:
| Flow (m³/h) | Flow (l/min) | Head (m) |
|---|---|---|
| 0 | 0 | 60 |
| 0.3 | 5 | 56 |
| 0.6 | 10 | 51 |
| 0.9 | 15 | 45 |
| 1.2 | 20 | 41 |
| 1.5 | 25 | 36 |
| 1.8 | 30 | 25 |
| 2.1 | 35 | 20 |
| 2.4 | 40 | 15 |
| 3 | 50 | 10 |
| 3.6 | 60 | 4 |
What is a booster combo? The pump comes pre-assembled with an automatic flow controller, wiring and a 3-point moulded plug – connect the pipes, plug it in and it runs by itself: the pump starts when you open a tap and stops when the flow stops.
Choosing the right booster pump: count the taps and showers that will run at the same time and how high the water must go (a double-storey house needs more head than a single storey). Each 10m of head is about 1 bar of pressure. Pick a pump whose head at your flow is comfortably above what you need. Not sure? Send us your setup (tank position, number of bathrooms, storeys) and we will recommend a pump.