The QB60G combo is an entry-level household pressure booster: a 0.37kW peripheral (vane) pump supplied with union fittings and an automatic pump controller, ready to boost the pressure to a tap or two from a tank.
- Power: 0.37kW (0.5HP), 220–240V
- Maximum head: 30m
- Best for: one or two taps, small homes, cottages
Performance Table:
| Flow (m³/h) | Flow (l/min) | Head (m) |
|---|---|---|
| 0 | 0 | 30 |
| 0.3 | 5 | 23.3 |
| 0.6 | 10 | 16.6 |
| 0.9 | 15 | 10 |
| 1.2 | 20 | 3.3 |
What is a booster combo? The pump comes pre-assembled with an automatic flow controller, wiring and a 3-point moulded plug – connect the pipes, plug it in and it runs by itself: the pump starts when you open a tap and stops when the flow stops.
Choosing the right booster pump: count the taps and showers that will run at the same time and how high the water must go (a double-storey house needs more head than a single storey). Each 10m of head is about 1 bar of pressure. Pick a pump whose head at your flow is comfortably above what you need. Not sure? Send us your setup (tank position, number of bathrooms, storeys) and we will recommend a pump.


